Call Now! Toronto - (416) 665 - 6555 | Toll Free - (877) 243 - 9664

Fire Extinguisher Parts

section8

88   FIRE  EXTINGUISHER  PARTS

large_flag_tamper_seal
TAMPER  SEALS

Large Flag TAMPER SEAL. Underwriters Laboratories Inc. Recognized Component for fire extinguishers. Dated with the current year to show that the seal has been replaced during annual maintenance according to NFPA 10.

PART # DESCRIPTION
TS-Y Large Flag Tamper Seal Yellow
pull_pins_chain_key
PULL PINS
PART # DESCRIPTION
SPP Single Point Pull Pin (Steel)
DSP Diamond Single Point Pin (Steel)
LSP Long Pull Pin, Stainless Steel
TWP Thin Wire Pull Pin, Steel
*RPIN Hose Rack Pull Pin
*NOT SHOWN
PULL PINS
PART # DESCRIPTION
AN7066 Ansul Type Pull Pin  – 10 & 30 lb. D/C
AN651 Ansul Type Pull Pin  – 5 lb. Cartridge
SNP Red Plastic Pull Pin
K259057 Kidde Red Plastic Pull Pin

 

PULL PINS, CHAIN & KEY
PART # DESCRIPTION
SF755651 Red Plastic Strike Pull Pin
CHAIN 4” Galvanized Chain
KEY Cotter Key for Use w/Chain
A532 Nylon Chain for Pull Pin (Amerex)

92   FIRE  EXTINGUISHER  PARTS

co2_horns
CO2   HORNS,  NIPPLES  &  HANDLES
CO2   HORNS

NOTE: There are several different designs of 5 lbs. horns and discharge tubes. Carefully check the horn and tube to order the correct replacement parts. Also, some discharge tubes have a long diffuser tip and will not work with some horns. Test for flow of CO2 through the discharge tube and horn assembly to be sure.

PART # DESCRIPTION
CH5 5 lbs. CO2  Horn with Diffuser (for use
with discharge tubes with no diffuser)
CH5D 5 lbs. CO2  Horn  (for use with discharge
tubes with a built in diffuser)
CH10 Conical Horn with Brass Diffuser (for
10 lbs. CO2 Extinguishers)
CH15 Conical Horn with Brass Diffuser (for
15 and 20 lbs. CO2 Extinguishers)
RDH10 Rapid Discharge Horn & Handle for
10 lbs. CO2  Extinguishers)
RDH15 Rapid Discharge Horn & Handle for
15 and 20 lbs. CO2 Extinguishers)
CO2_NIPPLES_HANDLES_CLIPS
CO2   NIPPLES, HANDLES & CLIPS
PART # DESCRIPTION
RDC Diffuser Clip for RDH CO2  Horn
RDD Diffuser for RDH CO2  Horn
RH6 Rubber Handle for all Conical Horns
ESN7 ¼” Diameter x 6” Long Galvanized
Steel Nipple
H-STYLE_CO2_HORNS_NIPPLES_HANDLES
H-STYLE CO2   HORNS, NIPPLES & HANDLES
PART # DESCRIPTION
HHANDLE Rubber Handle for General Horns
HNIPPLE ¼” Diameter x 8” Long Galvanized
Steel Nipple for use with HHANDLE
G34586 H Style Horn complete with Diffuse
safety_horn_holder

SAFETY HORN HOLDER keeps the horn in the down position (keeping water from entering the hose/horn) and against the extinguisher. Use UHS33 strap to install.

PART # DESCRIPTION
+ SHH Safety CO2 Horn Holder
UHS33 Universal Hose Strap
SAFETY_HOSE_HOLDER

SAFETY HOSE HOLDER for Pressure Water and Dry Chemical Extinguishers.

PART # DESCRIPTION
A14776 Hose Holder 27¾” Long x ⅜” Wide

95   FIRE  EXTINGUISHER  PARTS

VEHICLE BRACKETS.

Proven welded steel construction with catch pin to keep bracket from vibrating open. Pin must be pulled prior to extinguisher removal.

PART # DESCRIPTION
 VB-4 Running Board Bracket for 4” – 4½”
Diameter Shells
VB-5 Running Board Bracket for 4¾” – 5¼”
Diameter Shells
VB-6 Running Board Bracket for 5½”- 6”
Diameter Shells
VB-7 Running Board Bracket for 6¼” – 6¾”
Diameter Shells
VB-8 Running Board Bracket for 6¾” – 7¼”
Diameter Shells
NEW  H.B.  20  BRACKET
NEW_HB_20_BRACKET
FOR LARGE DIAMETER CYLINDERS UP TO 8” BRACKET IS 17-1/2” TALL 8-1/4” WIDE & 8” DEEP WITH AN EXTRA BRACE TO SUPPORT TALL CYLINDERS

 

PART #
HB20   Running Board Bracket for up to 8” Diameter Shells
CARTRIDGE OPERATED VEHICLE BRACKETS.

ANSUL and GENERAL. Steel bolted construction design. Latch will not vibrate open. Pin must be pulled prior to extinguisher removal. HEAVY DUTY.

PART # DESCRIPTION
A10C ANSUL 10 lbs. Style Cartridge
Operated Bracket
AG20C ANSUL and GENERAL 20 lbs. Style
Cartridge Operated Bracket
AG30C ANSUL and GENERAL 30 lbs. Style
Cartridge Operated Bracket
VPIN ”Hair Pin” Clip for Heavy Duty
Brackets.  Package of 5
*RBP Rubber Bumper Pad – Fits all Brackets
* NOT SHOWN
MANUFACTURERS CARTRIDGE OPERATED VEHICLE BRACKETS.
ANSUL
PART # DESCRIPTION
AN14098 30 lb. Units Cartridge Operated Bracket
AN14091 20 lb. Units Cartridge Operated Bracket
AN14228 10 lb. Units Cartridge Operated Bracket

 SPECIAL ORDER

GENERAL (CALL FOR SPECIAL PRICING)
G36145 20 lb. Units Cartridge Operated Bracket
VEHICLE_BRACKETS
CARTRIDGE_OPERATED_VEHICLE_BRACKETS

96   FIRE  EXTINGUISHER  PARTS

WALL_HANGERS_AMEREX
WALL HANGERS.   AMEREX
PART # DESCRIPTION
A1521 Amerex Wall Hanger, 5 – 6 lb.
A4834 Amerex Wall Hanger, 1¼  – 2½ lb.
A5525 Amerex Wall Hanger, 5 – 13 lb.
WALL_HANGERS_ANSUL_and_BUCKEYE
WALL HANGERS.   ANSUL and BUCKEYE
PART # DESCRIPTION
AN3651 Ansul Wall Hanger, 10 – 30 lb.
Cartridge Extinguisher
AS16819 Ansul Wall Hanger, 4½  – 9 lb. Sentry
AS25298 Ansul Wall Hanger, 10 – 14 lb. Sentry
AS30643 Ansul Wall Hanger, 17 – 20 lb. Sentry
BU700207 Buckeye Wall Hanger, 2½  – 5 lb.
WALL_HANGERS_FYR-FYTER_and_GENERAL
WALL HANGERS.   FYR-FYTER and GENERAL.
PART # DESCRIPTION
FF109942 Fyr-Fyter Wall Hanger, 2½  – 6 lb.
FF109963 Fyr-Fyter Wall Hanger, 10 lb.
G35215 General Wall Hanger, 2½  – 6 lb.
F20 General Wall Hanger, 10 & 20 lb.
(Use Part #G11146)
WALL_HANGERS_KIDDE
WALL HANGERS.   KIDDE.
PART # DESCRIPTION
K202208 Kidde Wall Hanger, 4 lb.
K293263 Kidde Wall Hanger, 6 lb.
K320688 Kidde Wall Hanger  Pro-Line
*K340357 Kidde Wall Hanger
*K340358 Kidde Wall Hanger
*K340791 Kidde Wall Hanger

*NOT SHOWN

SPRING_CLIP_BRACKETS
SPRING CLIP BRACKETS.
PART # DESCRIPTION
SC5 Spring Clip Bracket for 5 and 6 lbs.
D/C, Halon and CO2 Units
SC15 Spring Clip Bracket for 10 and 15 lbs.
D/C, Halon and CO2 Units

97   FIRE  EXTINGUISHER  PARTS

See Manufacturers Pictograms For Brackets Not Shown
WALL HANGERS
WALL HANGERS. UNIVERSAL
PART # DESCRIPTION
WH1 Universal Wall Hanger for 2½ gal. Water
WH5 Universal Wall Hanger for 5 lbs.
Extinguisher
WALL HANGERS.
PART # DESCRIPTION
WH10 Universal Wall Hanger for 10 – 15 lbs.
Extinguisher
WH20 Universal Wall Hanger for 20 lbs.
Extinguisher
WALL_HANGERS_UNIVERSAL
WALL HANGERS.   PYRENE/CHUBB
PART # DESCRIPTION
P50 (13352) Pyrene Type Wall Hanger, 10 lb.
P60 (13358) Pyrene Type Wall Hanger, 20 lb.
P70 (12676) Pyrene Type Wall Hanger, 10 lb.
P80 (12704) Pyrene Type Wall Hanger, 20 lb.
P90 (12958) Pyrene Type Wall Hanger, 5 lb.
WALL_HANGERS_PYRENE_CHUBB
WALL HANGERS.   DIAMOND and FLAG
PART # DESCRIPTION
D160738 Diamond Wall Brackets, 2½  – 7 lb.
D160752 Diamond Wall Brackets, 10 lb.
D160791 Diamond Wall Brackets, 17 & 20 lb.
F10 (10368) Flag Type Wall Hanger, 5 lb. D.C.
F20 (10507) Flag Type Wall Hanger, 5lb. CO2
F30 (10519) Flag Type Wall Hanger, 10 lb.
F40 (10518) Flag Type Wall Hanger, 15 & 20 lb.
and Pressurized Water
WALL_HANGERS_DIAMOND_and_FLAG
SPRING CLIP BRACKETS.   UNIVERSAL
PART # DESCRIPTION
UBRK Spring Clip Bracket for 2½ and 2¾ lbs.
D/C and Halon Units
5BRK Spring Clip Bracket for 5 and 6 lbs.
D/C and Halon Units
SPRING_CLIP_BRACKETS_UNIVERSAL
UNIVERSAL VEHICLE BRACKETS.
PART # DESCRIPTION
V2 Universal Bracket for 2½ and 2¾ lbs. Units
V5 Universal Bracket for 5 and 6 lbs. Units

PYRENE USE CV110 AND V5P (For older Chubb Units)

FOR NEW PYRENE 2½ & 5 LB. BRACKETS
SEE PAGE 98
UNIVERSAL_VEHICLE_BRACKETS

98   FIRE  EXTINGUISHER  PARTS

VEHICLE_BRACKETS_AMEREX
See Manufacturers Pictograms For Brackets Not Shown

 

VEHICLE BRACKETS
VEHICLE BRACKETS. AMEREX
PART # DESCRIPTION
A818 Vehicle Bracket for Amerex 5 lbs. Units
A817 Vehicle Bracket for Amerex 2½ lbs. Units
A821 Vehicle Bracket for Amerex 5 lbs. Units
VEHICLE BRACKETS. AMEREX
PART # DESCRIPTION
A846 Vehicle Bracket for Amerex 10 lbs. Units
A860 Amerex Bracket with Cord
Fits 3 – 4¼” Diameter Shells
*A7166 Replacement Cord for Brackets

A860 and A862
*Not Shown

VEHICLE BRACKETS. AMEREX
PART # DESCRIPTION
A862 Amerex Bracket with Cord
Fits 5 – 7” Diameter Shells
A864 Amerex Bracket with Cord
Fits 7 – 8” Diameter Shells
*A7802 Replacement Cord for Bracket

A864,  NOT SHOWN
*Not Shown

VEHICLE_BRACKETS_ANSUL
VEHICLE BRACKETS.   ANSUL
PART # DESCRIPTION
AN79758 Vehicle Bracket for Ansul 5 lbs.
Cartridge Operated Units
*AS24610 Vehicle Bracket for Ansul Sentry
2½ and 2¾ lbs. Units
AS54160 Vehicle Bracket for Ansul Sentry

5 lbs. Units
*Not Shown

VEHICLE_BRACKETS_KIDDE_PYRENE_BADGER
VEHICLE BRACKETS.   KIDDE – PYRENE – BADGER
PART # DESCRIPTION
K466400 Vehicle Bracket for Kidde
5 and 6 lbs. Units
K466401 Vehicle Bracket for Kidde.
2½ and 2⅝  Units
Request A Quote