Call Now! Toronto - (416) 665 - 6555 | Toll Free - (877) 243 - 9664

Exit & Emergency Lighting Batteries & Bulbs

section5

44   EXIT & EMERGENCY LIGHTING       lumacell

emergency_lighting_unit1
EMERGENCY  LIGHTING  UNIT

Standard Features include:

  • CSA C22.2 No. 141 Certified
  • 120 Volt AC Input Voltage Standard Hard Wired OR
  • Automatic Solid State Charging Circuitry
  • Just Plug it in – 3’ Cord
  • Low Voltage Disconnect Circuit
  • AC “ON” LED, Test Switch.
  • Seated Dust Proof Transfer Relay
  • Metal Cabinet
  • Complete with 6 Volt Battery

PART #                           DESCRIPTION                                         
RG36-2MT          Lumacell Emergency Lighting

combination_exit1
COMBINATION  EXIT/EMERGENCY
LIGHTING  UNIT

Self Powered Combination Exit/Emergency Lighting Unit complete with Battery – MUST BE HARD WIRED.

  • Eliminates Duplicate Wiring from Panel
  • Operates in Excess of 30 minutes
  • Eliminates Interconnect Wiring between
  • Universal for Wall or Ceiling Installation.
  • Emergency Lighting Unit and Exit Sign
  • Metal Cabinet.
 
  • LED Light Source
metal_exit_signs
METAL  EXIT  SIGNS    LED LIGHT SOURCE
  • Lamp Sockets are permanently mounted to frame to eliminate need to remove and re-install wireway.
  • Clear and easy access to wiring entry for wall, ceiling or end mount installation.
  • Canopy mounting system designed to speed installation.
  • Metal Cabinet
  • CSA C860

PART #                       DESCRIPTION                                           
E-LER               English Exit – Metal Cabinet

lighting_service_label1
LIGHTING  SERVICE  LABEL

TEST LABEL RECORD   

PART #                      DESCRIPTION                             
ELTL               Emergency Lighting Test Label
                         (Roll of 100)

45   EXIT & EMERGENCY LIGHTING       lumacell

NH50LER660  STANDARD FEATURES
  • Injection-molded thermoplastic housing
  • Innovative, snap together design allows for fast installation
  • Replaceable lead-calcium (6v 4amp) battery
  • Comes complete with 2 face plates, 1 back plate, and 1 canopy
  • Replaceable knockout directional chevron’s
  • Two adjustable glare free light heads
  • Uses Halogen MR16 lamps with front glass cover
  • CSA C860
  • Low energy consumption LED light source

PART #          DESCRIPTION
E-NH50       English Combination Exit/Emergency Lighting

NH50LER660
NH362MH  STANDARD FEATURES
  • Injection-molded thermoplastic housing
  • Innovative, snap together design allows for fast installation
  • Replaceable lead-calcium (6v 4amp) battery
  • Universal 120/347 AC input
  • Two adjustable glare free light heads
  • Uses Halogen MR16 lamps with front glass cover
  • CSA listed to 141
  • Test switch and charge rate indicators

PART#          DESCRIPTION
362MH         Emergency Light

NH362MH_STANDARD_FEATURES
LER660SP  STANDARD FEATURES
  • Injection-molded thermoplastic housing
  • Innovative, snap together design allows for fast installation
  • Universal 120/347 AC input
  • Universal mount comes complete with 2 face plates, 1 back plate, and 1 canopy
  • Replaceable knockout directional chevron’s
  • Replaceable Ni-Cad battery included
  • Provides 3 hours of continuous emergency illumination
  • CSA C860
  • Low energy consumption LED light source

PART#              DESCRIPTION
E-660SP         English Exit Sign

LER660SP_STANDARD_FEATURES
NEW  EMERGENCY  LIGHTS.

Same quality as other major brands, but at a lower price. Low profile design in a neutral finish of injection molded, flame retardant, high-impact, thermoplastic housing. Features include universal mounting with “EZ” quick connect for easy installation, push to test switch, solid state charger, low voltage disconnect and power on LED indicator light. Standard with two fully adjustable 5.4W, glare-free lighting heads. Universal voltage 120 or 277 VAC operation. R2HRD has remote capabilities up to 22 lamp watts.

PART # DESCRIPTION
1PLG 6V, 10.8 W Light
L 16¼” x H 5⅛” x W 2⁵⁄₁₆” – COMPLETE WITH 3’ CORD
S1HRD 6V, 10.8 W Light
L 16¼” x H 5⅛” x W 2⁵⁄₁₆” – HARD WIRED
R2HRD 6V, 22 W Light
L 16” x H 5¼” x 2⁵⁄₁₆” – HARD WIRED
NEW_EMERGENCY_LIGHTS

47   BATTERIES  FOR  EXIT  &  EMERGENCY  LIGHTING

REPLACEMENT  BATTERIES.
FOR  EMERGENCY  LIGHTS  AND  ALARMS

One of the longest life, most powerful batteries you can get for your money.

PART # DESCRIPTION
6V4 6V, 4 Amp, L 2¾” x H 4” x W 1⅞”
6V7.5 6V, 7.5 Amp, L 6” x H 3¾” x W 1⅜”
6V12 6V, 12 Amp, L 6” x H 3¾” x W 2
12V4 12V, 4 Amp, L 3½” x H 4” x W 2¾”
12V7 12V, 7.5 Amp, L 6” x H 3¾” x W 2½”
12V12 12 Volt, 12 Amp
12V18 12 Volt, 18 Amp
12V26 12 Volt, 26 Amp
12V35 12 Volt, 35 Amp
FOR_EMERGENCY_LIGHTS_AND_ALARMS
ALKALINE
PART # DESCRIPTION
ALK92 Energizer® AAA Alkaline Battery
ALK91 Energizer® AA Alkaline Battery
ALK93 Energizer® C Alkaline Battery
ALK95 Energizer® D Alkaline Battery
ALK22 Energizer® 9V Alkaline Battery
alkaline

48   EXIT  & EMERGENCY  LIGHTING

BULBS_SERVICE_LABEL
BULBS  &  SERVICE  LABEL

Replacement BULBS for exit signs and emergency lighting.

PART # DESCRIPTION
BT65S  120V, 20 W, Intermediate Screw (20T6.5)
BT65DC  120V, 20 W, Dbl. Contact Bayonet (20T6.5)
 BT6  145V, 15 W, Dbl. Candelabra Screw (15T6)
 B7C7  120V, 7 W, Dbl. Candelabra Screw (7C7)
BT82  6V, 6.63 W, Dbl. Contact Bayonet (11-082)
B170  4V, 7.2 W, Dbl. Contact Bayonet (11-170)
B909  6V, 3.7 W, Miniature Wedge (909)
B939  6V, 5.4 W, Miniature Wedge (939)
B914  6V, 4 W., Miniature Wedge
*B7613  6V, 8 W, Sealed Beam (PAR36) N/S
*BH7555  12V, 8 W, Sealed Beam (PAR36) N/S
*BPL7  120V, 7 W, Compact Fluorescent (PL7) N/S
*B0170 6V, 9 W, Tungsten Bulb (Wedge) N/S

1 For Lumacell *NOT SHOWN

WATT_AVER_LED

WATT$AVER LED (120 VAC) retrofit exit sign bulbs use only one watt of energy. Screws into existing exit sign sockets with no rewiring required. Unbreakable polycarbonate housing resistant to shock and vibration.

 PART # DESCRIPTION SIZE
WS1  Candelabra Screw Base  3¾”
WS2  Double Contact Bayonet Base  3¾”
WS3  Intermediate Screw Base  3¾”
 MBA  Medium Base Adapter
(use with WS3) N/S
 ¾”
WATT_AVER_INCANDESCENT

WATT$AVER INCANDESCENT exit sign bulbs (120 VAC) use only five watts of energy. Screws into existing exit sign sockets with no rewiring required. Unbreakable polycarbonate housing resistant to shock and vibration. May qualify for any utility rebates available. Rated for 130,000 (15 years), 5 year warranty.

 PART # DESCRIPTION SIZE
WS4 Candelabra Screw Base  3¾”
WS5 Double Contact Bayonet Base  3¾”
WS6 Intermediate Screw Base  3¾”
 MBA Medium Base Adapter
(use with WS6) N/S
 ¾”
BATTERY_LEADS

BATTERY LEADS replace old, corroded battery leads to ensure optimum battery performance. The UBL can also be used to retrofit any existing lead connection. The PBL is ideal for use when replac- ing a battery with a plug connector attached.

 PART # DESCRIPTION
UBL Universal Battery Lead (Set)
PBL Plug Battery Lead (Set)
Request A Quote